Does the ice maker need water?

needs.

When the ice maker is stopped, Bai needs to open the drain to drain the remaining water. In addition, when the ice maker is full, the ice full indicator will turn on, and the ice makerChina Ice Machines Suppliers will stop making ice. You also need to open the drain to drain the remaining water.

The ice maker is a kind of refrigeration mechanical equipment that produces ice after the water passes through the evaporator and is cooled by the refrigeration system refrigerant. The refrigeration system uses the water carrier to produce ice after passing through a certain equipment under power.

According to the principle of the evaporator and the different production methods, the shape of the ice cubes produced is also different; people generally divide ice machines into pellet ice machines, flake ice machines, plate ice machines, tube ice machines, shell ice machines, etc. Wait.
Through the water inlet valve, the water automatically enters a water storage tank, and then is pumped to the shunt pipe by the water pump. The shunt pipe evenly flows the water to the evaporator cooled by the low-temperature liquid refrigerant. The water is cooled to the freezing point, and these are cooled to the freezing point The water will freeze into ice, and the water that has not been frozen by the evaporator will flow into the water storage tank and restart the circulation through the water pump.

When the ice cube reaches the required thickness, it enters the deicing state, and the high-pressure hot air discharged from the compressor is led to the evaporator through the reversing valve to replace the low-temperature liquid refrigerant. In this way, a water film is formed between the ice cubes and the evaporator. This water film makes the ice cubes leave the evaporator, and the ice cubes fall freely into the ice storage tank below by the action of gravity.

Through the supplementary water valve, the water automatically enters a water storage tank, and then the water is pumped through the flow control valve to the diverter head, where the water is evenly sprayed on the surface of the ice maker and flows through the ice maker like a water curtain On the wall surface, the water is cooled to the freezing point, and the water that has not been evaporated and frozen will flow into the water storage tank through the porous tank, and the circulation will restart.