Summary:With the increase in the food industry and some supermarkets and shopping malls, there are many places where Portable Re...
With the increase in the food industry and some supermarkets and shopping malls, there are many places where Portable Refrigerator
are needed, so the demand for ice machines is also increasing. An ice maker is a refrigeration mechanical device that cools water from a refrigerant in a refrigeration system through an evaporator to generate ice. I believe that many people do not know about the cleaning of the ice maker. Because the use of the ice maker is very common, it is also very important to clean it in time, so as to ensure that the service life of the ice maker will be longer. Generally divided into the following points:HIGH QUALITY CAR 28L REFRIGERATOR
1. After using the ice maker, it is necessary to clean the ice cubes inside. When cleaning the ice machine, be sure to turn off the power supply, and do not flush the machine directly with the water hose. You should use clean water, then add an appropriate amount of neutral detergent (acidic, alkaline and other corrosive solvents are strictly prohibited) to wipe the machine hoarding and inner tank, and then wipe it with a soft cloth.
2. The ice maker must unscrew the head of the water inlet hose every two months to clean the water inlet valve filter screen, so as to prevent the sand and mud impurities in the water from clogging the water inlet, which will cause the water inlet to become smaller, resulting in poor water intake. Ice making happens.
3. Clean the dust on the surface of the condenser every two months. Poor condensation and heat dissipation will cause damage to the compressor components. When cleaning, use vacuum cleaners, small brushes, etc. to clean the oil and dust on the condensing surface. Do not use sharp metal tools to clean, so as to avoid damage to the condenser.
4. The water pipes, sinks, storage bins and protective films of the ice maker need to be cleaned every two months. When not in use, it should be cleaned, and the ice mold and the moisture in the box should be dried with a hair dryer, and placed in a non-corrosive gas and ventilated and dry place to avoid storage in the open air.